|
|
#61
21-10-2013, 09:15
|
||||
|
||||
Slow, tedious progress, but progress nevertheless.
Built the template for the side storage pods, the drivers side will house the rear relay block.  To close off the frame rails, I built a plug that also includes a nut to affix a bracket for the trailer hitch. I see myself building a trailer that I can haul track tires with and that is also a tent someday.    The inner fender seam between the Boxter and the bug is almost complete. Built a panel that merges the strut mount to body.     Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run / Dyno Run Oval Ragster-'57 Rag/'04 Boxster S 
|
|
#62
07-11-2013, 02:42
|
||||
|
||||
|
Little update:
Got these aluminum mufflers, yes, I said aluminum. Got a buddy that builds big HP cars and he swears by them, very, very light, no cracks yet for him. I'm doubtful, but they aren't that expensive and I could flange them to a stainless system if I wanted and still get big weight savings.  Ditto for cheap Chinese headers. They are supposed to be stainless, and they are except for the severely warped flange. Had to spend a bunch of time on them to get the flange flat and to open the bolt holes up. Really surprising how simple some of the mistakes are, but equally surprising how little a complete header setup was.  Working on the fitment to the fenders, these will have to be widened ever so slightly unless I like the smell of burnt rubber around every corner. Looks kinda cool though...     Finally got the condenser attached to the rad, used aluminum spacers my wife uses for her business, re-threaded them for metric, and had Eric at NorCal Motorsportz weld them on for me.     A before shot of the area I need to fill between the Boxster chassis and the tubing.   The mess I have yet to tackle...  Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run / Dyno Run Oval Ragster-'57 Rag/'04 Boxster S
|
|
#63
07-11-2013, 11:04
|
||||
|
||||
|
Still going strong
 Very impressive! I'm very suprised that the wheelbase is almost the same, reffering to one of your first shots with the beetle body hanging over the porsche.
__________________
Passat B1 LS Passat B8 Businessline R
|
|
#64
07-11-2013, 11:19
|
||||
|
||||
|
OMFG...what a cool project!
__________________
VW Golf 3 Cabrio 2.0i VW Passat 1.6i Trendline VW Golf 2 1.6i CL -> Exit VW Passat 35i 1.8i CL -> Exit Cordoba 1.4i 16v Vario ->Exit Cordoba TDI Vario Signo ->Exit VW Golf 3 TDI CL Variant-> Exit VW Vento TDI GL Highline -> Exit
|
|
#67
21-11-2013, 07:25
|
||||
|
||||
|
The details continue - gauge cluster now.
Cut the stock speedo ring and moved it over 1.5". It was really tricky because I couldn't put the cluster in level, didn't flow with the curves, and it couldn't flow with the curve because it would look too tilted, I ended up with a compromise between the two.       Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run / Dyno Run Oval Ragster-'57 Rag/'04 Boxster S
|
|
#68
21-11-2013, 07:42
|
||||
|
||||
|
Front and rear latches will be controlled by stock solenoids. Deepest part of front latch aluminum will be embedded in fiberglass to bond it to inner hood surface.
           
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run / Dyno Run Oval Ragster-'57 Rag/'04 Boxster S
|
|
#71
09-12-2013, 12:26
|
||||
|
||||
|
How's the progress on this awesome project?
|
|
#72
05-02-2014, 07:05
|
||||
|
||||
|
Stopped at least for another month, bought a new house and need to build a new shop, I'll post again when momentum returns!
Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run / Dyno Run Oval Ragster-'57 Rag/'04 Boxster S
|
|
#73
03-03-2014, 19:40
|
||||
|
||||
|
Great project!!
Looking forward to see some more pictures. 
__________________
Dirigent van een geföhnd 4 cil. orkest  Golf MKII GTI G60 5drs Oma's Edition One 16V __________________________________________ Golf GTI 8V MKI Waiting for Restauration Volvo V70 classic 2.5T Daily
|
|
#75
06-07-2014, 20:58
|
||||
|
||||
|
Dirt is still being moved on our hillside, should have a flat spot to build a 26'x40' shop next week. 0 progress on this project, of course things take more time than you expect to get rolling.
Here's a shot of a Super/Boxster S from Sweden, hope to be doing this in my bug next year. https://vimeo.com/m/99021642 Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run / Dyno Run Oval Ragster-'57 Rag/'04 Boxster S
|
|
#77
27-02-2015, 07:32
|
||||
|
||||
|
Nothing new to report, she just sitting there. A roller, yes, but no progress. May be done with engineering next week on the garage structure, but don't expect to be working on it again for at least a couple of months.
Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run / Dyno Run Oval Ragster-'57 Rag/'04 Boxster S
|
|
#78
06-12-2015, 08:10
|
||||
|
||||
|
I read on germanlook your pics are dead because of hosting them on Facebook.
Did you know you can host them on here too!
__________________
Welcome to the internet: Where men are men, women are men, and little girls are FBI agents.
|
Linear Mode
