Well...My motor wasnt all that happy when I tore it down. So I figure Id use my spare G60 block and rebuild it right??? Wrong...A sacrificial G-Lader decided that that block needed some Damage too. So I go hunting for another G60 or PL 16v block...No dice :frown: Well I DID find a set of 82.5mm pistons for a 20v...AND a FREE 9A 2.0 16v block. Can anyone see where this is goin??? :biggrin:

2.0 20V! Are those pistons for 20mm wrist pins?

__________________
1991 Golf GTI 20v 4x4 677pk
1989 Golf 20v turbo 4motion
1990 Golf GTI G60
1990 Golf GTI 16vG60
1991 Golf GTI G60
1991 Golf GTI Edition one G60
1983 Golf GTI 16vG60
1983 Golf GTI G60
2000 Audi S3

Ive found both 20mm and 19mm for 8.5:1, 9.25:1, 9.5, 13:1 compression ratios. JE and Weisco seem to have both sizes off the shelf in 82mm and 82.5mm and prints for 81, 81.5, 83, and 84mm pistons. So Im not complainin :biggrin: Im most likely going to be using the 20mm pistons if I get the 2.0 block...But Ill stick with the 19mm rods I have if thats how it goes.