Well, since the derby is mostly done, I am now beginning my other project on the polo. the car is a 76 polo l with 0,9l engine and 40hp

My plans:

exterior- original. the same look as my derby. lots of chrome
interior- just the plain steel painted, 2 race bucket seats and 4point harnesses, and a cage.
engine- 3f engine with tuning cam and motorcycle carbs. (90-100hp)
old skool 13X6-7" wheels and 80-100mm lowering.

there is extremely little rust on this car luckily. almost just the front and the door, but I have got a new one in store.

should get the weight down to 550-600kg when it is done.. that is a lot of fun with 100hp
Me and a friend who is the owner of www.raceland.no is going on a trip to ast suspension in valkenswaard, holland and further down to raceland in belgium in the beginning of july. On this trip I will also stop in dortmund and pick up an 3f engine. Just have to get a passport. I thought one could travel between schengen countries without showing passports, but holland seems to have changed theese rules lately btw: a passport costs 125 euros in norway..

started with stripping the car today and scraping the floor for padding and glue.. more updates to come.

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

super cool, why don' you come by for a cup of coffee, i live between Valkenswaard and Dortmund...

so this is the idea?:



nice project but why don't you think of widening like the "berg-cup" cars???

would be cool too and some 13" 8j rims

__________________
Mijn project, '77 audi 50

funny well, our time schedual is pretty tight as it is.. If it was just me, I would have stopped No, both of theese cars are too racing-look for me.. I want to keep that original old skool look on the outside, pretty much the same as the derby.. the interior and angine will be all racing on the other side...

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

the 1st one is pretty old skool, the rims and not widened and all, ok forget the paint-job...

__________________
Mijn project, '77 audi 50

well, if you give it a better paint job, it would look similar

berserker: how is it with passports to get into holland now ? do not think I will get a new one in time..

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

where are you from again? EU country? if so than you only need an ID/identity card and not a passport, but you know since the EU that we have open borders so no-one will check you, only if the police pulls you over...

you can risk to go without, but you also have to go to germany and since the world championship is going on, there are a lot of boarder controls (just slipped my mind)

__________________
Mijn project, '77 audi 50

He's from Norway like me, we are not within the EU, but we are following most EU rules (including the Schengen agreement) as we are a part of the EEC.

__________________
If you have a 5 cylinder, you don't need a stereo.

1999 Audi A6 quattro
1990 Volkswagen Golf CL Syncro
1987 Audi Coupe quattro

yeah.. the problem is that in norway, the only valid identification papers abroad is our passports.. got the engine today on ebay.. 100 euros.. damn thats cheap..

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

the only thing to remember is with the World championship that the Germans are really controlling their boarders for terrorists....

so I wouldn't risk it without a passport

__________________
Mijn project, '77 audi 50

just came back from my trip to eindhoven / Valkenswarg and nijmegen now.. brougt back 4 ats classic rims, a engine and a gearbox.. pics will come.. I am planning a days work on the car tomorrow..

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

well, here are the pics I promised you.. the 3f engine, my "new" garage, the ats rims and the inside of the car.. also how the rear wheelarches look now reydu to be welded back in place.. I have already welded the battery box together as you can se.. Also had a hard time removing the glue from the inside of the car, but I am getting there

things are atleast moving forward

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

well, the work is progressing slowly since I just bought a 93- polo fox also, but I have got some welding done, and the engine is assembled, washed, sandblasted and painted..

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

how did you get the gearbox so clean? also sandblasted? with some clear paint?

__________________
Mijn project, '77 audi 50

yepp.. first steaming, then sandblasting and at the end som silver hotpaint.. will last atleast a month Of maybe I have some luck.. this car is only meant for tracks, so it wont be driven that much..

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

bought some bushings today from germany.. payed 161 euros delivered to me in norway, hope theese will help on the track. Pics. are borrowd from thomas78 here on the forum when he mounted them on.

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

Ey you're still alive, cool I also need those, I just find 161 euro a little bit much for some legos..

What did you do to your brakes??

__________________
Mijn project, '77 audi 50

hello berserker I havent don eanything with it yet, but I am going to do the same as I did on mye old skool derby. VwII 239mm vented brakes from golf 2 in front and golf 2 drumbrakes in the rear. more than enough and brakes like hell
the VW II calippers fit perfectly with the g40 calipper carrier, but you can also use carriers from a golf 1 with VWII calippers. have to work a little with them, but not much.. easy with a grinder..

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

VW2 calipers are also used on polo g40's and fit on later model polo's carriers+front legs...

Like I did:



Polo 2f legs with vw2 calippers with Brembo Max discs and ferodo ds2500 blocks..

__________________
Mijn project, '77 audi 50

yes, my brakes will be similar to this. the 2f legs and the mk1 legs are the same i think. the only thing I need is the carrier you have on theese legs. drilled and grooved vented discs and greenstuff og other blocks also help a lot yes.. what did you do to your master cylinder and brake servo ? nothing ? I dont know what fits here..

__________________
- golf mk2 16vT
- polo -76 projekt
- derby -77 old skool

No polo 1 legs are different from polo 2 and 2f legs, you need the legs with half moon shaped braking blocks and not the square ones, The discs from the square ones have a different offset and do not fit..

If you get legs with the half moon shaped blocks, you just need to replace the callipers for the vw2 ones and the rests will fit perfectly..

I don't change my master cilinder because it will make no difference because the cilinders of the callipers are the same, and my Audi already has brake servo..

__________________
Mijn project, '77 audi 50